Installing a Closet Organizer
More in Bathroom
Step 1: Remove Old Closet
Remove your old closet material and mark the back wall at 75-3/4”. Use a level and a tape measure to make sure the marks are straight and level.
Step 2: Mark Locations for Vertical Panels
Locate and mark all studs along each line. Then mark the location of each vertical panel by referring to each unit width measurement.
Step 3: Cut Track to Length
After determining the width of each unit and the location of studs, cut the track to length with a hacksaw.
Step 4: Attach Track to Wall
Using a drill, attach track across the back wall to the studs.
Step 5: Hang Vertical Panels
Hang the vertical track panels from track according to your design.
Step 6: Install Cam Shelf
Install cam shelf by placing shelf with cam fittings on cam screws and tightening fittings with a Phillips screwdriver.
Step 7: Install Shelves
Attach shelf pins and install shelves at desired heights.
Step 8: Install Drawers
Using an electric drill, secure drawer glides to the panels (Image 1). Then, using a screwdriver, secure all of the drawer faces and install each drawer (Image 2).
Step 9: Add Closet Rods
Last, install the closet rods.
DIY Experts
Was this project helpful?
Advertisement
Find your DIY inspiration or just steal ideas from the best renovations and remodels done by the DIY Network pros.
