How to Make a Mosaic Tile Tabletop

Using pieces of broken tile, you can easily create a colorful, unique mosaic tabletop. Slightly damaged tile can often be obtained for free from your local distributer, making this a low-cost project as well.

Highlights:

Step 1: Break Tiles
Step 2: Sort Tiles
Step 3: Spread Adhesive and Set Tiles
Step 4: Apply Grout and Epoxy

Step 1: Break Tiles

Break tiles into manageable pieces with a hammer. Be sure to smash the underside of the tile so you do not scratch the surface.

Step 2: Sort Tiles

Sort and arrange preferred tiles before spreading mastic on the table.

Step 3: Spread Adhesive and Set Tiles

Using a 3/16” trowel, spread mastic on the table, working in small sections to prevent drying, and begin arranging tiles (Image 1). Be sure to apply a little pressure to set the tiles. Use tile nippers to trim tiles to fit as needed (Image 2).

- Image 1
- Image 2

Step 4: Apply Grout and Epoxy

After allowing the tiles to set and dry, spread grout between the tiles, and wipe of excess grout with a sponge. Allow the tiles to dry for 24 hours and then mix and pour epoxy over the entire tabletop. Allow to set for another 24 hours.