How to Install a Floating Laminate Floor
More in Floors
Step 1: Cut the Underlayment
Remove and save any quarter round and base trim (image 1). Roll out the closed cell foam underlayment over the length of the room and cut it to size (image 2).
Step 2: Place the Foam Mat
Set the foam mat in place with the plastic side down. This will act as a moisture barrier for the floor. Tape the seams for a watertight seal.
Step 3: Cut and Place the Laminate
Lay the full board in place and measure where the cuts need to be made. With a miter or chop saw, cut through the measured laminate materials. For more stability, the second row of laminate materials should start with half planks so the seams of the planks are staggered throughout the room.
Step 4: Place the Rest of the Pieces
After the first row, lock the long side of the plank and use a wood block to drive the short sides together. Have another person stand on the piece receiving the next plank. This will keep the rest of the floor from shifting during installation. The rest of the room lays out the same way piece by piece.
DIY Experts
Was this project helpful?
Advertisement
Find your DIY inspiration or just steal ideas from the best renovations and remodels done by the DIY Network pros.
Resources
- Countertop from Silestone
Faucet (model: 278.100.620), towel bars (model: 477.324.620), towel ring (model: 477.440.620), robe hooks (model: 477.545.620), toilet paper holder (model: 477.650.620), knobs (model: 623.125.620) from CIFIAL USA
Cabinets (model: 278.100.620) from Bridgewood
Self-rimming toilet (model: 6091-068-0013) from VitrA
Mirror and bath light fixture (model: 6953/4) from Elk Lighting Inc.
