Reinvent a Room: Budget Decorating Projects
How to Install a Curtain Rod (page 1 of 2)
More in Windows Walls and Doors
What You'll Need to Do:
- Measure current page
- Draw a Level Line current page
- Level It current page
- Center the Rod Over the Window current page
- Position the Brackets current page
- Secure the Brackets page 2
- Cut the Rod to Length page 2
- Attach Rings and End Support page 2
- Place Outer Ring page 2
- Position Finials on the Ends of the Rod page 2
- Secure the Rod page 2
For the maximum amount of light, the end of the brackets should be placed on each side of the window opening so the curtains can be drawn back completely. The exact placement will depend on the width of the gathered curtain. In our project, only end supports are required. For larger windows, extra support also may be needed above the middle of the window. Curtain weight and rod strength should also be considered when deciding on how much rail support is needed.
Measure
Make a mark above the window recess for the required height of the rod. This will depend on curtain length and aesthetic preference. Hanging the rod close to the ceiling line can make a room look taller
Draw a Level Line
Use the height mark to draw a level guide line above the recess; this should extend slightly beyond the recess width on each side.
Level It
Use a level to make a mark on the horizontal line directly above the corner of the recess.
Center the Rod Over the Window
Measure back to mark the position of the brackets. This distance will depend on the width of the gathered curtain.
Position the Brackets
Position the end support on the mark and use a pencil to mark off attachment holes. Remove the end support.
Products
Excerpted from Do It Yourself Home Improvement
© Dorling Kindersley Limited 2009
Advertisement
Find your DIY inspiration or just steal ideas from the best renovations and remodels done by the DIY Network pros.
